AutoSPRINK 2000

Update / Patch

03/15/2001.

The following issues have been fixed in AutoSPRINK 2000 v2.1.82.614.

---------------------------------

AS1712 - Crash during hydraulic calculations.

AS1682 - Trim kits size not reported to AutoLIST.

AS1681 - Trim kits - Enable them to be assigned to non-parts.

AS1679 - Connect sprinklers to pipes, option #2, always inserts a 3" jog.

AS1645 - Pressure loss not working on backflows when manually applied.

AS1447 - Difference in hydraulic damand reported between Pipe Optimizer and printed report.

---------------------------------

The following issues have been fixed in AutoSPRINK 2000 v2.1.81.614.

AS1663 - Hang when reporting a system that has a supply with two flowing pipes attached.

AS1656 - Crash while assigning make-ons when stock listing with auto make-ons turned off.

AS1653 - Ductile iron pipes need to have grooved end preps.

AS1648 - Allow welded make-ons like threaded make-ons and show it in the drawing.

AS1646 - Pipe outlet tool doesn't pick up default pipe outlet information.

---------------------------------

The following issues have been fixed in AutoSPRINK 2000 v2.1.79.614.

AS1637 - Wall rectangle gets justification wrong based on direction that rectangle is entered.

AS1632 - Split dimension symbols imported from AutoCAD doesn't work.

AS1631 - Pump not working as a supply.

AS1630 - Connect sprinklers to pipes sometimes gets the end preps wrong.

AS1629 - Licensing information storage in registry doesn't work when using a common profile for a user across multiple computers.

AS1628 - Velocity Pressure on Hydraulics Report not reported correctly.

AS1627 - Remote area will change properties of node tags that do not belong to it when it should just change the number.

AS1626 - Segment lengths change when a different label is added or taken away from the pipe.

AS1624 - Crash while running automatic fittings.

AS1623 - Need to be able to place node tags manually.

AS1622 - Importing DWG background layers duplicates layer names.

AS1621 - Multiple hangers of different lengths on a single pipe do not stock list correctly.

AS1620 - Fittings made-on to the wrong ends of some pipes.

AS1619 - No hydraulic flow through pipes connected to the outlets of other pipes when the pipe terminates at the cut point of the outlet rather than the base.

AS1618 - Actual density information on flowing sprinklers report is incorrect when sprinklers are not regularly spaced; make the column optional.

AS1617 - Pipes do not export vertical pipe markings.

AS1616 - Auto hanger placement would not place a hanger 3' from the end of a pipe.

AS1615 - Outlets created on pipes are not always the same type as that specified on the default pipe outlet.

AS1613 - When a reducing Firelock coupling can't be found, a standard reducing coupling is available but is not found instead.

AS1612 - Backflow preventor with manually assigned equivalent length doesn't show loss on report.

AS1611 - When the base units of a drawing are set to millimeter, the equivalent length on a valve or fitting is not converted correctly.

AS1609 - Default outlets not used to create new outlets. (Same as AS1615).

AS1603 - Opening a drawing that uses a DWG background that cannot be found causes an endless loop requesting the user to locate the file.

AS1600 - Reducer/adapter fittings at sprinklers detach when copied and pasted.

AS1596 - Split imported AutoCAD dimension symbols doesn't work.

AS1579 - Node analysis in hydraulic analysis dialog crash when drawing changes while the dialog is minimized.

AS1576 - Autopeak results on cover page of hydraulics report should be optional.

AS1572 - Crash during auto schedule pipes command.

AS1571 - Negative length hangers for adjustable pipe stands do not stock list correctly.

AS1567 - Change display of dry pendent sprinklers. Enable easy drop command to create dry pendents.

AS1563 - Pipe outlets don't always use the default properties. (Same as AS1615).

AS1560 - Attempting to get defaults from earthquake bracing in the M.E.P.CAD parts book causes lockup.

AS1556 - Opening a drawing that uses a DWG background that cannot be found causes an endless loop requesting the user to locate the file.

AS1552 - Stock listing a grouped selection lists some members when it should not list any.

AS1549 - Labels moving when the size of the vertical pipe marking is changed.

AS1542 - Pressing undo then redo after stock listing does not restore the line labels, only the arrows.

AS1537 - Hanger lengths wrong on stock listing report. (Same as AS1621).

AS1534 - Connect sprinklers to pipes, style #2, moves sprinkler and places wrong fitting.

AS1529 - Connect sprinklers to pipes, style #4, creates outlets in wrong direction sometimes.

AS1520 - Pipe segment labels move when stock listing.

AS1515 - Auto hanger placement should not consider a pipe that ends in a sprig or a drop as supported.

AS1482 - System will not flow when using a pump as a source.